Wood Grain Series Laminated Metal
More stable and durable than wood material, suitable for wall Decoration, Door, Partition, Elevator Panel, Escalator Cladding, Ceiling, Grille Ceiling
Wood grain series laminated metal is often used in interior decoration materials such as door panels, ceilings and elevator.
Lienchy Metal uses exclusive lamination technology to combine wood grain film and metal sheet,
The surface of the wood grain laminated metal has a texture like real wood. Without adhesive, our film is not easy to peel off after lamination.
The wood grain film can also bring a warm and soft atmosphere to the metal material.
Wood grain PVC films series have a variety of colors to choose, like Maplewood, Redwood, Cherrywood, Beechwood, Yew, Dark Teak, Walnut, Kassod, Black Sandalwood, Oak, Pinewood, Rosewood and Bamboo Stripes.
Combining durable and flame-resistant PVC film and sturdy metal substrate, laminated metal not only provides a variety of visual aesthetics, but also is easy to maintain and has good weather resistance.
It is an excellent solution for interior decoration, wall and equipment surface lamination.
Product Application and Specification
- Interior Decoration:
- 1.Wall panel
- 2.Door panel
- 3.Ceiling and Grille ceiling
- 4.Partition panel
- 6.System case(e.g. computer case, case or panel of consumer electronics)
- 7.Automobile interiors
|Item||Name||Reference Standard||Test Result|
|Appearance||Gloss||JIS K 5400, ASTM D523||Pass|
|Color difference||CIE1 976Lab, ASTM E313, ATM D2244||See sample|
|Adhesive property (100 squares method)||JIS K 5400, ASTM D3359||Pass|
|Workability Test||Lamination property (Erichsen test)||JIS K 6744, JIS B 7729, LCM spec.||Pass|
|Bending property||JIS K 6744, ASTM D4145||Pass|
|Low temperature processing property||JIS K 6744, ASTM D2671||Pass|
|Durability Test||Chemical resistance||JIS K 6744||Pass|
|Stain resistance||JIS K 5400, CNS 423, CNS 11312, CNS 2984||Pass|
|Boiling water resistance||LCM spec., JIS K 6744, ASTM D2485||Pass|
|Abrasion resistance||ASTM D4060||Pass|
|Salt spray test||JIS Z 2371, JIS K 8180, JIS Z8802||Pass|
|Ultraviolet ray arc lamp test||JIS A 1415, JIS K 6744||Pass|
|Cold and hot water circulation test||LCM spec., JIS K 6744, ASTM D33359||Pass|
If the application uses for outdoor than you can review the page of our Outdoors Laminated Metal.
|Standard||GB 8624-2012, GB/T8624-2007, GB/T20284-2006|
|No.||Testing Items||Unit||Specifications||Test Results||Determination|
|1||Flammability Test||---||The sample is loaded onto the sample clamp, which is vertically fixed in the combustion chamber. The burner is tilted 45 degrees and the flame length is adjusted to 20+-2mm. The fuel gas is 95% pure propane gas and is ignited on the sample for 30s.|
|1-1||Edge Ignition||---||None of the flame tip on the five samples reaches 150mm mark within 60s of ignition||Pass||Pass|
|1-2||Dropping the pilot||---||The filter paper is not ignited.||Pass||Pass|
|2||Monomer combustion test||---||The volumetric flow rate of propane is 0.50 m³/s - 0.65 m³/s, the ambient temperature (20+-10)℃. The flame is produced by propane combustion. Gas combustion heat output is (30.7+-2)KW. The combustion time is 20 min.|
|2-1||FIGRA||W/s||FIGRA ≦ 250||153.5||Pass|
|2-2||LFS||---||Not yet reached the edge of the sample.||Pass||Pass|
|2-3||THR 600s||MJ||THR 600s ≦ 15||9.9||Pass|
|2-4||SMOGRA||m²/s²||SMOGRA ≦ 180||112.4||Pass|
|2-5||TSP 600s||m²||TSP 600s ≦ 200||114.6||Pass|
|3||Combustion performance||---||The amount of smoke||Flaming droplets|
|REMARKS||The samples were all tested under the required technical environmental condition.|
|RESULT||Combustion performance levels: C-s2, d1|
Fire Resistance Certificate
We ship the product in coil or sheets, with customer assigned service, Lien Chy Metal will meet your expectation, like we always do, for more information, please refer to Protective Film and Package
- About us
- Case Study
- Interior Decorating Panels
- Electronic devices & Home appliances
- Antifouling & Bacteriostatic Panels
- Food Storage Panels
- Solar Panels
- Partial Coating Solutions
- Stainless Steel Sheet
- Electro-Galvanized steel sheets (SECC)
- Antimicrobial & Anti-Fingerprint Steel Coating
- Lien Chy Metal Product in Stock
- 3M DI-NOC Film
- Laminated Metal
- Anti-Fingerprint Stainless Steel
- Titanium Coated Stainless Steel
- Pre-Coated Metal
- Backing Coats, Protective Film and Package
- Contact Us
Over 26 Years Wood Grain Series Laminated Metal | Metal Surface Treatment Manufacturer - Lienchy Laminated Metal
Based in Taiwan, LIENCHY LAMINATED METAL CO., LTD., since 1992, is a Wood Grain Series Laminated Metal | metal surface treatment manufacturer. Main products include pre-coated steel, anti-fingerprint coating stainless steel and painted steel coil. Providing laminated metal and anti-fingerprint stainless steel solutions that is suitable for electronics, elevator interiors, door panels, cold storage panels, modular panels, prefabricated interior fittings, automotive interiors, etc
Lienchy Laminated Metal is capable of manufacturing ISO certified 1.6mm-thick laminated panel with total production capacity that exceeds 50,000MT per year, and meets SGS, RoHS and GREENGUARD standards. Laminated Metal, Pre-Coated Metal, and Anti-Fingerprint Stainless with new materials to create more brand-new and diverse applications.
Lienchy Laminated Metal has been offering customers high-quality pre-coated steel, anti-fingerprint coating stainless steel and painted steel coil, both with advanced technology and 30 years of experience, Lienchy Laminated Metal ensures each customer's demands are met.