Mirror Series Laminated Metal
Mirror series metal laminates have smooth and glossy polished surface
The ceramic-like polished mirror surface of Lienchy Metal’s mirror series laminated metal is suitable for car body, home appliance panels.
Mirror series laminated metal is made of PVC/PET film combined with metal substrate, so that the surface of the metal substrate has the appearance of a glossy paint.
The mirror series film has a variety of color patterns to choose from: mirror white, silver stripes, baroque leaf, camphor wood. Mirror white pattern is very suitable for use as a waterproof, mildew-proof, and flame-resistant interior decoration; while the tree rice and white leaf pattern can be used for decorative panels; camphor wood pattern was commonly used in tour cars in the early days, there are some Middle Eastern customers who apply it to the elevator panel.
These films are without adhesive, because Lienchy Metal will use a unique technology to make the film closely adhere to the metal substrate during roll-ro-roll production.
The PVC/PET laminated metal is a composite material made up of the colored film and a substrate of metal. It combines the dazzling color and pattern design with the durability of the base metal material. Not only the laminated metal provides a variety of visual aesthetics, but also a versatile and practical solution. The laminated metal is in flame retardant, excellent maintainability, and has good protection to extend the using life. The bright surface is similar ceramic, that increases the texture of the product.
Product Application and Specification
- Interior Decoration:
- 1.Wall panel
- 2.Door panel
- 3.Partition panel
- 5.System case(e.g. computer case, case or panel of consumer electronics)
- 6.Automobile interiors
|Item||Name||Reference Standard||Test Result|
|Appearance||Gloss||JIS K 5400, ASTM D523||Pass|
|Color difference||CIE1 976Lab, ASTM E313, ATM D2244||See Sample|
|Adhesive property(100 squares method)||JIS K 5400, ASTM D3359||Pass|
|Workability Test||Lamination property(Erichsen test)||JIS K 6744, JIS B 7729, LCM spec.||Pass|
|Bending property||JIS K 6744, ASTM D4145||Pass|
|Low temperature processing property||JIS K 6744, ASTM D2671||Pass|
|Durability Test||Chemical resistance||JIS K 6744||Pass|
|Stain resistance||JIS K 5400, CNS 423, CNS 11312, CNS 2984||Pass|
|Boiling water resistance||LCM spec., JIS K 6744, ASTM D2485||Pass|
|Abrasion resistance||ASTM D4060||Pass|
|Salt spray test||JIS Z 2371, JIS K 8180,JIS Z8802||Pass|
|Ultraviolet ray arc lamp test||JIS A 1415, JIS K 6744||Pass|
|Cold and hot water circulation test||LCM spec., JIS K 6744, ASTM D33359||Pass|
If the application uses for outdoor than you can review the page of our Outdoors Laminated Metal.
|Standard||GB 8624-2012, GB/T8624-2007, GB/T20284-2006|
|No.||Testing Items||Unit||Specifications||Test Results||Determination|
|1||Flammability Test||---||The sample is loaded onto the sample clamp,which is vertically fixed in the combustion chamber.The burner is tilted 45 degrees and the flame length is adjusted to 20+-2mm.The fuel gas is 95%pure propane gas and is ignited on the sample for 30s.|
|1-1||Edge Ignition||---||None of the flame tip on the five samples reaches 150mm mark within 60s of ignition||Pass|
|1-2||Dropping the pilot||---||The filter paper is not ignited.||Pass|
|2||Monomer combustion test||---||The volumetric flow rate of propane is 0.50 m³/s-0.65 m³/s,the ambient temperature(20+-10)℃.The flame is produced by propane combustion.Gas combustion heat output is(30.7+-2)KW.The combustion time is 20 min.|
|2-1||FIGRA||W/s||FIGRA ≦ 250||153.5||Pass|
|2-2||LFS||---||Not yet reached the edge of the sample.||Pass|
|2-3||THR 600s||MJ||THR 600s ≦ 15||9.9||Pass|
|2-4||SMOGRA||m²/s²||SMOGRA ≦ 180||112.4||Pass|
|2-5||TSP 600s||m²||TSP 600s ≦ 200||114.6||Pass|
|3||Combustion performance||---||The amount of smoke||Flaming droplets|
|REMARKS||The samples were all tested under the required technical environmental condition.|
|RESULT||Combustion performance levels: C-s2, d1|
Fire Resistance Certificate
We ship the product in coil or sheets, with customer assigned service, Lien Chy Metal will meet your expectation, like we always do, for more information, please refer to Protective Film and Package
Mirror White Gloss Mirror Finish Laminated Metal
Lienchy Metal's Mirror White Gloss Mirror Finish Laminated Metal products, which are as crystal...Details
Silver Stripes Gloss Mirror Finish Laminated Metal
The appearance of electronic equipment and home appliances is mostly monotonous gray and white,...Details
Baroque Leaf Gloss Mirror Finish Laminated Metal
Lienchy Metal's Baroque Leaf Gloss Mirror Finish Laminated Metal products are coated with mirror...Details
Camphor Wood Gloss Mirror Finish Laminated Metal
The reason for the formation of the burl pattern is that the damaged area of the tree is proliferated...Details
For more information, click here to download
Request for Samples?
Mirror series metal laminates have smooth and glossy polished surface | Antimicrobial & Anti-Fingerprint Steel Sheet Manufacturing | Lienchy Metal
Based in Taiwan since 1992, LIENCHY LAMINATED METAL CO., LTD. has been a pre-coated steel products manufacturer. Our main metal products, include Mirror Series Laminated Metal, pre-coated steel sheet, PPGI, PPGL, PPAL, pre-painted steel sheet, pre-finished steel sheet, anti-fingerprint stainless steel, pvc laminated metal sheet, pvc cladded metal sheet, PVDF laminated metal sheet, titanium coated stainless steel sheet, pre-painted metal sheet, coil steel sheet and titanium coated stainless steel sheet, which are manufactured with a 350M roll-to-roll production line and 50,000 tons annual production capacity..
Lienchy Metal is capable of manufacturing ISO certified 1.6mm-thick laminated steel sheets and meet SGS, RoHS and GREENGUARD standards. We are long-term partner of EU and US home appliance brands and Japanese elevator factories, our products have also been exported to all over the world, from Taiwan, Japan, South Korea, China, ASEAN countries, the United Arab Emirates, Russia, Europe and North America.
Lienchy Metal has been offering customers high-quality pre-painted and anti-fingerprint metal sheets, both with advanced technology and 30 years of experience, Lienchy Metal ensures each customer's demands are met.