Metallic Series Laminated Metal
Let normal metal plates have baked paint texture like matte sand, hairline, striped mirror surfaces
Metallic Texture PVC Film Laminated Metal
The metallic series laminated metal is suitable for use in home appliances, electronic product cases, or products such as kitchen cabinets and walls that need to conform to the most common home decoration styles.
Compared with products that only use metal substrates to fit the surface, laminated metal made of durable and flame-resistant PVC film combined with metal substrates such as stainless steel and electro-galvanized can not only maintain the strength of metal materials, but also have a variety of film styles to choose from.
The film itself also has the advantage of protecting the metal substrate, which can prolong the lifespan of the metal substrate, is easy to maintain and has good weather resistance, and is an excellent product with both performance and appearance.
Metallic texture grain PVC films have more colors for you to choose like champagne cold, champagne silver, silver, champagne platinum, silver sands, metallic hairline, silver stripes.
Our films are without adhesive, we use unique gluing technology to combine the film and the coil of metal.
Product Application and Specification
Suggested Use:
- Interior Decoration:
- 1.Partition panel
- 2.Elevator
- 3.System case(e.g. computer case, case or panel of consumer electronics)
- 4.Automobile interiors
General Testing
| Item | Name | Reference Standard | Test Result |
|---|---|---|---|
| Appearance | Gloss | JIS K 5400, ASTM D523 | Pass |
| Color difference | CIE1 976Lab, ASTM E313, ATM D2244 | See Sample | |
| Adhesive property(100 squares method) | JIS K 5400, ASTM D3359 | Pass | |
| Workability Test | Lamination property(Erichsen test) | JIS K 6744, JIS B 7729, LCM spec. | Pass |
| Bending property | JIS K 6744, ASTM D4145 | Pass | |
| Low temperature processing property | JIS K 6744, ASTM D2671 | Pass | |
| Durability Test | Chemical resistance | JIS K 6744 | Pass |
| Stain resistance | JIS K 5400, CNS 423, CNS 11312, CNS 2984 | Pass | |
| Boiling water resistance | LCM spec., JIS K 6744, ASTM D2485 | Pass | |
| Abrasion resistance | ASTM D4060 | Pass | |
| Salt spray test | JIS Z 2371, JIS K 8180,JIS Z8802 | Pass | |
| Ultraviolet ray arc lamp test | JIS A 1415, JIS K 6744 | Pass | |
| Cold and hot water circulation test | LCM spec., JIS K 6744, ASTM D33359 | Pass |
If the application uses for outdoor than you can review the page of our Outdoors Laminated Metal.
Application Presenting
Combustion Performance
| Standard | GB 8624-2012, GB/T8624-2007, GB/T20284-2006 | ||||
|---|---|---|---|---|---|
| No. | Testing Items | Unit | Specifications | Test Results | Determination |
| 1 | Flammability Test | --- | The sample is loaded onto the sample clamp,which is vertically fixed in the combustion chamber.The burner is tilted 45 degrees and the flame length is adjusted to 20+-2mm.The fuel gas is 95%pure propane gas and is ignited on the sample for 30s. | ||
| 1-1 | Edge Ignition | --- | None of the flame tip on the five samples reaches 150mm mark within 60s of ignition | Pass | |
| 1-2 | Dropping the pilot | --- | The filter paper is not ignited. | Pass | |
| 2 | Monomer combustion test | --- | The volumetric flow rate of propane is 0.50 m³/s-0.65 m³/s,the ambient temperature(20+-10)℃.The flame is produced by propane combustion.Gas combustion heat output is(30.7+-2)KW.The combustion time is 20 min. | ||
| 2-1 | FIGRA | W/s | FIGRA ≦ 250 | 153.5 | Pass |
| 2-2 | LFS | --- | Not yet reached the edge of the sample. | Pass | |
| 2-3 | THR 600s | MJ | THR 600s ≦ 15 | 9.9 | Pass |
| 2-4 | SMOGRA | m²/s² | SMOGRA ≦ 180 | 112.4 | Pass |
| 2-5 | TSP 600s | m² | TSP 600s ≦ 200 | 114.6 | Pass |
| 3 | Combustion performance | --- | The amount of smoke | Flaming droplets | |
| C | --- | S2 | d1 | ||
| REMARKS | The samples were all tested under the required technical environmental condition. | ||||
| RESULT | Combustion performance levels: C-s2, d1 | ||||
Fire Resistance Certificate
Package Method
We ship the product in coil or sheets, with customer assigned service, Lien Chy Metal will meet your expectation, like we always do, for more information, please refer to Protective Film and Package
Result 1 - 7 of 7
Result 1 - 7 of 7
Hot Products
Antimicrobial & Anti-fingerprint Steel Coating
For HVAC, server room, food service, hospitals, appliances, electronic device panel applications,...
Read More
Anti-fingerprint Stainless Steel
Uses high-tech coatings to improve the surface cleanness and corrosion resistance. It has passed...
Read More
Laminated Metal
A composite material, combining beautiful, dazzling appearance and increasing product...
Read More